Graphtec Blade Holder Base with 30pcs Blade Vinyl Cutter Compatible CB09 CB09U

Description

Graphtec Blade Holder Base with 30pcs Graphtec Blade Vinyl Cutter CB09 CB09U
CB09 Graphtec Blade Holder Vinyl Plotter Holder with 30 PCS Blades
Features
30° blades are predominantly used for cutting very thin window tint and Mylar materials.
45° blades are the standard blade that comes with most vinyl cutters. They are recommended for all standard cast and calendared vinyls as well as other thin materials.
60° blades are recommended for thicker materials such as reflective films, flock and twill materials and also sand-blast resist.
High hardness, come with springs and blade holder base.
The Hard Alloy Cutter Blades are with fine polishing process, suitable for mahogany, vinyl sheet, wood, silhouette cameo, faux leather, PVC color board, MDF and other precision relief.
Compatible with Graphtec CB09U CB09 Cutting Blade Holder
Tips:
1. Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended blade longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.
2. When the word carved with angular phenomenon, you should change the blade to eliminate the problem, if the phenomenon persists after change blade, it should be the holder problem.
3. When problem arise the blade holder, try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder.
Items Included
One (1) Blade holder
Ten (10) 30 Degree Cutter Blade (Yellow)
Ten (10) 45 Degree Cutter Blade (Red)
Ten (10) 60 Degree Cutter Blade (Blue)
NOTE: Graphtec CB09 blades came with NO instructions. please do internet search and watch a few YouTube videos. Looking on YouTube will give you all the information you need to set graphtec blade up.
Payment
Shipping
Returns
About Us
Payment
Shipping
Returns
About Us
We accept PayPal, major credit cards, and other methods supported by eBay Managed Payments.
We offer FREE shipping on all orders!
Your order will be dispatched within 24 hours receiving payment and you should expect to receive it two to five days after dispatch.
If you are not completely satisfied within 30-days of your purchase,  you can return the product and get a full refund or replacement (your choice).  Our return process is eBay managed and very easy to follow.  We will be responsible for the return shipping cost of the damaged or wrong items.
We are a family owned business located in the beautiful western Pennsylvania. We began as a wholesale jewelry and fashion importer. After successfully selling a few precison jewelry scales on a major online marketplace in 2009, we decided to transform into a professional weight scale distributor. Then soon expanded into other great product categories.
See our other items
CB09 Graphtec Blade Holder Vinyl Plotter Holder with 30 PCS Blades Features ---30° blades are predominantly used for cutting very thin window tint and Mylar materials. ---45° blades are the standard blade that comes with most vinyl cutters. They are recommended for all standard cast and calendared vinyls as well as other thin materials. ---60° blades are recommended for thicker materials such as reflective films, flock and twill materials and also sand-blast resist. ---High hardness, come with springs and blade holder base. ---The Hard Alloy Cutter Blades are with fine polishing process, suitable for mahogany, vinyl sheet, wood, silhouette cameo, faux leather, PVC color board, MDF and other precision relief. ---Compatible with Graphtec CB09U CB09 Cutting Blade Holder Tips: 1. Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended blade longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down. 2. When the word carved with angular phenomenon, you should change the blade to eliminate the problem, if the phenomenon persists after change blade, it should be the holder problem. 3. When problem arise the blade holder, try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder. Items Included ---One (1) Blade holder ---Ten (10) 30 Degree Cutter Blade (Yellow) ---Ten (10) 45 Degree Cutter Blade (Red) ---Ten (10) 60 Degree Cutter Blade (Blue) NOTE: Graphtec CB09 blades came with NO instructions. please do internet search and watch a few YouTube videos. Looking on YouTube will give you all the information you need to set graphtec blade up.
Graphtec Blade Holder Base with 30pcs Graphtec Blade Vinyl Cutter CB09 CB09U
CB09 Graphtec Blade Holder Vinyl Plotter Holder with 30 PCS Blades
Features
30° blades are predominantly used for cutting very thin window tint and Mylar materials.
45° blades are the standard blade that comes with most vinyl cutters. They are recommended for all standard cast and calendared vinyls as well as other thin materials.
60° blades are recommended for thicker materials such as reflective films, flock and twill materials and also sand-blast resist.
High hardness, come with springs and blade holder base.
The Hard Alloy Cutter Blades are with fine polishing process, suitable for mahogany, vinyl sheet, wood, silhouette cameo, faux leather, PVC color board, MDF and other precision relief.
Compatible with Graphtec CB09U CB09 Cutting Blade Holder
Tips:
1. Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended blade longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.
2. When the word carved with angular phenomenon, you should change the blade to eliminate the problem, if the phenomenon persists after change blade, it should be the holder problem.
3. When problem arise the blade holder, try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder.
Items Included
One (1) Blade holder
Ten (10) 30 Degree Cutter Blade (Yellow)
Ten (10) 45 Degree Cutter Blade (Red)
Ten (10) 60 Degree Cutter Blade (Blue)
NOTE: Graphtec CB09 blades came with NO instructions. please do internet search and watch a few YouTube videos. Looking on YouTube will give you all the information you need to set graphtec blade up.
Payment
We accept PayPal, major credit cards, and other methods supported by eBay Managed Payments.
Shipping
We offer FREE shipping on all orders!
Your order will be dispatched within 24 hours receiving payment and you should expect to receive it two to five days after dispatch.
Returns
If you are not completely satisfied within 30-days of your purchase,  you can return the product and get a full refund or replacement (your choice).  Our return process is eBay managed and very easy to follow.  We will be responsible for the return shipping cost of the damaged or wrong items.
About Us
We are a family owned business located in the beautiful western Pennsylvania. We began as a wholesale jewelry and fashion importer. After successfully selling a few precison jewelry scales on a major online marketplace in 2009, we decided to transform into a professional weight scale distributor. Then soon expanded into other great product categories.
See our other items
CB09 Graphtec Blade Holder Vinyl Plotter Holder with 30 PCS Blades
Features
30° blades are predominantly used for cutting very thin window tint and Mylar materials.
45° blades are the standard blade that comes with most vinyl cutters. They are recommended for all standard cast and calendared vinyls as well as other thin materials.
60° blades are recommended for thicker materials such as reflective films, flock and twill materials and also sand-blast resist.
High hardness, come with springs and blade holder base.
The Hard Alloy Cutter Blades are with fine polishing process, suitable for mahogany, vinyl sheet, wood, silhouette cameo, faux leather, PVC color board, MDF and other precision relief.
Compatible with Graphtec CB09U CB09 Cutting Blade Holder
Tips:
1. Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended blade longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down.
2. When the word carved with angular phenomenon, you should change the blade to eliminate the problem, if the phenomenon persists after change blade, it should be the holder problem.
3. When problem arise the blade holder, try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder.
Items Included
One (1) Blade holder
Ten (10) 30 Degree Cutter Blade (Yellow)
Ten (10) 45 Degree Cutter Blade (Red)
Ten (10) 60 Degree Cutter Blade (Blue)
NOTE: Graphtec CB09 blades came with NO instructions. please do internet search and watch a few YouTube videos. Looking on YouTube will give you all the information you need to set graphtec blade up.